Sawing

Schelling Plate Saw
The Schelling Precision Plate Saw, located in Portland, understates the term “precision cutting”. While PM offers a wide range of aluminum plate sawing capabilities, the Schelling provides dimensional and squareness accuracy produced to customer requirements consistently. Quality surface finish is guaranteed.

Work Area

14′ wide bed – 14′ back gage

Thickness	8.000″ Maximum
Width of Strip	1.000″ Minimum

	Standard Tolerance	Precision Tolerance
Parallelism	+/- .032″	+/- .015″ in 168″ up to 4.000″ thickness +/- .032″ in 168″ over 4.000″ thickness

Standard Tolerance

Precision Tolerance

Squareness

Measured corner

to corner

+/- .032″

+/- .020″ up to 4.000″ thickness
+/- .032″ over 4.000″ to 6.000″ thickness
+/- .063″ over 6.000″
(surface to sawed edge)

	Standard Tolerance	Precision Tolerance
Length & Width Saw Finish	+/- .032″ 63 Micro Inch	+/- .010″ up to 60″ 32 Micro Inch

Metlsaw – Plate Saw

Work Area

12′ wide bed – 14′ back gage

Thickness	.050″ minimum – 6.00″ Maximum
Width of Strip	.500″ Minimum

	Standard Tolerance	Precision Tolerance
Parallelism –	+/- .032″	+/- .005″

Standard Tolerance

Precision Tolerance

Horizontal Squareness

Measured corner to corner

Vertical Squareness

Surface to sawed edge

+/- .032″+/- .032

+/- .0005″ per inch+/- .0005″ per inch

Standard Tolerance

Precision Tolerance

Length & Width –

Saw Finish

+/- .032″

32Micro Finish

+/- .005″ in 60″

32 Micro Finish

Metlsaw – Bar Saw

Diameter	.500″ – 6.00″ Maximum
Minimum Length of Cut	1″
	Standard Tolerance	Precision Tolerance
Tolerance	+/- .032″	+/- .010″

Amada Band Saw

Diameter	1.00″ – 10.00″
Minimum Length of Cut	.500″
	Standard Tolerance	Precision Tolerance
Tolerance	+/- .032″	+/- .010″